Space, military & aeronautical harnesses

Design your harness.
We find who builds it.

WireCodex is free-of-charge harness design software built for space, military and aeronautical programmes, and their test equipment. You define connectors, contacts and wires, and get a ROM cost from the first draft; we consult qualified harness manufacturers and bring you back a quote. One point of contact, from drawing to delivery.

WireCodex interface: demo project with harnesses W101, W102 and W201, and A3 drawing preview of W101 with D38999 connectors and shielded twisted pairs
Built for space, military & aeronautics

Speaks the language of flight, defence and test bench hardware

Born from harness work on launcher, satellite and EGSE test benches, WireCodex handles the parts, rules and documents that space, military and aeronautical programmes require.

Mil-aero connectors

MIL-DTL-38999, EN3645, Radiall EPX, D-Sub… with inserts and contact sizes.

Qualified wires

M22759, M27500, EN2267 and your own references, with AWG and contact compatibility checks.

Shielding & splices

Shielded pairs and triples, shield terminations, splices: drawn and checked end to end.

Test & traceability

Continuity and insulation tests, serial numbers and revisions for full traceability.

How it works

From schematic to quote in three steps

  1. Design

    Connectors, pin assignment, wire types, splices and shield terminations. Built-in checks flag duplicates and inconsistencies, and the ROM cost updates as you draw.

  2. Send your request

    Quantities, lead time, quality requirements: your request for quotation goes out with the complete technical package.

  3. Get one consolidated offer

    We consult several harness manufacturers and present you with an offer. You keep a single point of contact through to delivery.

The tool

An editor designed by harness makers, for engineers

Industry conventions are built in: you draw, the tool takes care of the rigour.

01 · DRAWINGS

Shop-floor-ready manufacturing drawings

Harness overview, pin-to-pin wiring diagram, dimensions and tolerances, inspection boxes (continuity, insulation), bill of materials and title block. In English, French or German.

A3 drawing generated by WireCodex: harness W201 with a circular connector and flying leads, dimensions and tolerances, harness control boxes, shielded twisted-pair wiring diagram, bill of materials and title block
02 · ROM COST

A ROM cost from the very first draft

While you draw, WireCodex counts crimps, splices, shield terminations and tests, and turns them into a rough-order-of-magnitude labour budget for each harness – with the effect of batch size and ways to lower the bill. You know the order of cost before asking for a quote; material is then priced at its real cost in the quotation.

Estimated budget screen: labour ROM cost of 300 € to 600 € for the demo project, breakdown of hours, effect of quantity and range per harness W101, W102 and W201
03 · INTERCONNECTIONS

Every signal traced end to end

Mating checks between harnesses, the full path of every net and the list of continuity tests for the test bench. Unterminated signals are flagged.

End-to-end continuity screen: 11 nets, 9 continuity tests, 2 signals going nowhere, with the path of each signal through harnesses W101, W102 and W201
04 · MATING CHECKS

Errors caught before the test bench

Pin-to-pin comparison of mating connectors: signals, pairs, shields and wire gauges. Interrupted shields, broken pairs and contacts leading nowhere are flagged, each with one click to the fault.

Mating comparison W101-P1 to W102-J3 on D38999 connectors: 7 compliant contacts, 2 deviations, 2 errors with their explanation
05 · MANUFACTURING PACK

Test report, labels and formboard, generated

Electrical test report (continuity, insulation, shield), process sheet, connector labels and wire markers, 1:1 formboard and material list with scrap – all consistent with the drawing.

Electrical test report for harness W101: continuity and insulation criteria, point-to-point test list with OK / NOK boxes
06 · QUOTE REQUEST

Request a quote without leaving WireCodex

Pick harnesses and quantities, delivery date, manufacturing standard and connector supply. Only error-free harnesses can be sent, and the encrypted request goes straight to our dedicated quotation desk.

Request a manufacturing quote dialog: harness selection with quantities, requested delivery, manufacturing standard and contact details

Personal library

Wires, connectors, contacts, accessories, consumables, tooling: your own references, reusable from one project to the next.

Standard wire codes

SL, SSL, TP, TSP, TT, TST… single wires, pairs and triples, shielded or not.

Pre-release checks

Blocking errors, duplicate contacts, mis-entered splices, wires outside the catalogue.

Costing

Consolidated bill of materials, wire and sleeving lengths with scrap, labour and margin.

For harness manufacturers

Qualified requests, ready to quote

Join the WireCodex network: receive complete requests – bill of materials, connections, quantities – with a dedicated costing tool.

Become a partner manufacturer
Standardised technical package

No more re-keying: the bill of materials arrives structured.

Built-in costing tool

Materials, labour, margin, unit and batch price.

No prospecting

Commission on closed deals only. Terms on request.

Privacy

Your drawings stay yours

Consulted manufacturers only see what they need to prepare a quote. Your identity and contact details are never passed on: WireCodex remains your single point of contact.

Contact

Got a harness project? Let's talk.

Write to us by email with a few lines about your needs. We reply by email, usually within two working days.

Your email is used by EBS Expertise only to answer your request and is kept for up to 3 years after our last exchange. See our privacy policy.

Customers & design offices

Harness type, quantities, lead time, quality requirements: tell us about your project or ask for a demo.

contact@wirecodex.eu

Harness manufacturers

Tell us about your company, your qualifications and the type of harnesses you build.

contact@wirecodex.eu